Realized Test Stands
For 30 years, imc has been providing turnkey test stands for research, development and production:
- Component test stands for testing electro-mechanical components, machines and tools
- Single to multi-axial test stands
- Motor test stands
- Transmission test stands
- Electric motor test stands
- Hybrid test stands
- Test stands for electrical components such as batteries
- Standard test stand: cost-efficient and quickly available
Prüfstände von imc
R&D Test Stand for Electric Power Steering

Electric power steering under inspection. Provision of steering motion and steering force. Over 40 different steering maneuvers and load profiles.Load machines with up to 350 Nm. mehr lesen »
Test stand for electric drivetrain

Development test stand with two test stations with integrated simulation solutions for electric powertrain including components (e-mobility). mehr lesen »
Development test stand for wheel hub motors

Testing e-motors for electric bicycles. Test object supply: bis 80Vdc, 170Adc. Electronic load: 1kW. mehr lesen »
Endurance test stands for starters

Over the course of a week, twelve sample starters must complete a specified number of target starts. The guidelines for the requirement profiles are given by the vehicle manufacturer. mehr lesen »
Measurement systems for landing flaps test stands

High flight speeds, low landing speeds and extreme ambient temperatures require powerful flaps. Enormous actuation forces are applied. The landing flaps are driven both as electro-mechanical and hydraulic during secondary flight controls. mehr lesen »
Shifting test stand with gearbox simulation

Shifting components such as control levers, housings and Bowden cables are tested under ambient conditions. mehr lesen »
Measurement & control system for fatigue testing

The durability test stands used by an Austrian university operate multi-functional tests of vehicle components: for example, for testing train bogies. The university operates the test stands with imc measurement hardware and software. mehr lesen »
Test stand for pump motors

The test stand is designed to evaluate various key properties of the test object such as characteristic curve, back EMF, cogging and drag torque, as well as its temperature behavior. mehr lesen »
E-motor test stand for quality assurance

Test stand for quality assurance and validation tests of ABS motors mehr lesen »
R&D test stand for EC-motors

With this test stand, the customer has the possibility to test a variety of motor types found in the automotive industry (e.g., steering or servo motors). mehr lesen »
Test stand for electric hand tools

The test stand allows: the approach of static load points, heating measurements , blocking tests, endurance tests, magnetization tests, measurement of iron loss and measurement of friction and fan losses. mehr lesen »
Test stand for electric parking brakes

The test object, the electric parking brake, makes about 100,000 brake engagements on the endurance test stand in about 4-6 weeks of testing. mehr lesen »
Development test stand for pump motors

The test stand is used to validate ABS motor specifications mehr lesen »
PI tabletop test stand for DC & EC motors

The test stand is ideal for R & D purposes and therefore offers a wide variety of measurement and analysis possibilities. mehr lesen »
Tabletop test stand for characteristic curves of DC & EC motors

The test stand is ideal for R & D purposes and therefore offers a wide variety of measurement and analysis possibilities. mehr lesen »
PI and torque test stand for DC motors

The testing performed with the Parameter Identification (PI) method is accelerated because the test object doesn’t require mechanical coupling to a load machine. mehr lesen »
Test stand for characteristic curves of DC motors

Test stand for determining the characteristic curve for the serial testing of DC motors. The test line with load machine, torque sensor and test object fixture is housed and controlled under a safety PLC guarding. mehr lesen »
EC/DC motor test stand with climate chamber

For characteristic curve variants, cogging & frictional torque, torque & generator constants mehr lesen »
R&D test stand for steering motors

Testing steering motors. Test object power supply: up to 80V DC, 170A DC. Electronic load: 2kW. Load machine: up to 5,000U/min mehr lesen »
Development test stands for E-motors

The imc standard development test stands for DC and EC/BLDC motors are a cost-effective and quickly available alternative to a customer-specific test bench. mehr lesen »
About imc Test & Measurement
Productive testing is essential for the success of our customers—hence, our driving force. Since 1988 we have been committed to support industrial innovations with optimal measurement solutions. We are manufacturing our productive test and measurement systems at our headquarters in Berlin, Germany, operating worldwide in Europe, the US and Asia.
imc Test & Measurement is part of Axiometrix Solutions, a leading test solutions provider comprised of globally recognized measurement brands.
Contact us
imc Test & Measurement GmbH
Voltastraße 5
13355 Berlin (Germany)
Headquarters | info@imc-tm.de
France | hotline@imc-france.com
USA | accounts@imcdataworks.com
China | cnsales@imc-tm.com
Spain | info@imc-tm.es
South Korea | hotline@imc-tm.kr
Switzerland | info@imc-tm.ch
Netherlands | info@imc-benelux.com
© imc Test & Measurement GmbH. All rights reserved. Privacy. Incident Reporting. Company Information.