In imc Online FAMOS, how can I create a “fast” GPS channel?

To create a "fast" GPS channel, simply use an appropriate, quick reference channel and use this with the "CreateVChannelInt". To use this feature, the control constructs must be enabled in Online FAMOS.

Geben sie folgende Zeilen in Online FAMOS mit Steuerkonstrukten ein:

VC_Satellites = CreateVChannelInt (Channel_001, pv.GPS.satellites)

VC_Longitude = CreateVChannelInt (Channel_001, pv.GPS.longitude)

VC_Latitude = CreateVChannelInt (Channel_001, pv.GPS.latitude)

VC_Speed = CreateVChannelInt (Channel_001, pv.GPS.speed)

The Channel_001 is the quick reference channel, thus providing the "time track" for the virtual channel "VC_Satellites". For each value the GPS Mouse delivers, there is a corresponding process vector variable.

Experimente mit anderen Geräten öffnen?

Wählen Sie ein Experiment und suchen Sie für dieses Experiment das passende Messgerät:

1) imcDevices starten! (es muss kein Gerät verbunden sein)
2) Laden Sie das Experiment über Datei -> ‚Öffnen für Gerät’

3) Im folgenden Fenster können Sie das Experiment einem passenden Gerät zuweisen (über die ‚>>’-Buttons). Es werden alle eingetragenen Geräte aufgelistet.
Die Farbcodierung hat folgende Bedeutung:
grüner Punkt: Das Gerät verfügt über die gleiche Ausstattung. Das Experiment kann genutzt werden.
gelber Punkt: Das Gerät verfügt über eine ähnliche Hardware. Es werden nur die passenden Einstellungen geladen. Bitte überprüfen Sie die Verstärkereinstellungen!
roter Punkt: Die Hardware unterscheidet sich. Das Experiment kann nicht geladen werden.

4) Nach der Zuweisung des Experimentes mit dem ‚>>’-Button zum Gerät betätigen Sie den ‚OK’-Button. Jetzt können Sie das Experiment starten und ggf. unter einem anderen Namen abspeichern.

Category: SW--DEVICES
How can I add my measurement device in Explorer?


Even if you've already connected the imc DEVICES/STUDIO software with the device, it is not yet listed in Explorer. By clicking on the Data (Device) button in imc STUDIO, you can open it in Explorer. Or via Tools -> File Manager in imc Devices.


It will open the following dialog box. Under imc Systems, click on the Devices icon.

Next, using the right mouse button, click anywhere on an open space, then under context menu, choose new. This will open the Add Device interface dialog box. Now click on Search Network.


Select the desired device and confirm with OK. The device is now available in Explorer under Devices.


My measurement data are incomplete. How can I repair this?

Among other things, incomplete measurement data occur if the UPS in the device is defective and, is therefor, not allowing the device to shut down correctly.

To repair the incomplete measurement data, follow these steps: First, download the following file:

Then, simply copy Repair.exe and dirrepair.bat into the folder with the defective files (Make a Back-up first!) and execute dirrepair.bat. After this, you should now have access to the defective data.

Unfortunately, this doesn’t work in all cases. Always make sure that you make a back-up copy of your data. If this solution hasn’t worked, please contact the imc Hotline.

How do I change the physical units of virtual channels in imc Online FAMOS?

In imc Online FAMOS, go to the “i” button.


On the right side of the screen , choose the virtual channel. Then on the left side column, choose the term “Y-Units”.  In the bottom left drop-down, choose “user defined”, then fill in your desired unit.

For Y units, you can also enter them as SI units, which are then calculated as such, e.g., Volt with Ampere would arise as Watts. Other units in SI require quotation marks in the box. Units other than SI units require quotation marks to be entered and are therefore passed off as text, for example, "mV/V".

imc Test & Measurement is an Axiometrix Solutions company.